Stihl Carb Flooding issue
Greetings:
I am in need of a carb assembly schematic for a ZAMA C1Q series carb.
I have a Stihl Blower-Vacuum machine.
* Stihl Mod # SH 85 -Z
* ZAMA Carb Mod # - C1Q / S68 / 212A
The past several weeks it became hard to start when cold, whether using the choke or primer bulb or not.
When it did start, it would take a minute or two to clear out the excess gas in the the cylinder.
Also it would only run at about 3/4 speed, even with the throttle wide open.
I replaced the carb pump diaphram, needle and spring, tried adjusting the Hi-Low needel settings,
removed the air cleaner, and the muffler.
Nothing I have done allowed the engine to perform any better.
One dealer says to replace the Carb - another says to bring it in for inspection.
Any input will be appreciated.
Thanks.
My email is: sully3425@cfl.rr.com
